Draft 0.2 – open for comment. Changes are expected.

Give feedback

Car seats

Category profile for child car seats – approval, height and weight ranges, orientation, installation, restraint and vehicle fit.

Block: Category profiles · Specification 0.2

The car seat profile applies to records with category.code set to car-seat. It describes the approval of the seat and how it is installed, so that a shop can filter by the child’s height and a retailer can check the approval label without opening a PDF.

Side view of a rear-facing infant car seat on a base with support leg, approved for children from 40 to 87 cm Direction of travel 87 cm 40 cm childHeightCm installation: isofix orientation: rearward
An infant car seat on a base with support leg. Values are the examples from the car seat schema.

Approval

approvalRegulation and approvalNumber are taken from the approval label of the seat.

  • UN R129. Seats are classified by the child’s height. childHeightCm holds the approved range, and iSize says whether the seat is approved in an i-Size category. A weight limit, where the approval states one, goes into childWeightKg.
  • UN R44. Seats are classified by weight groups. weightGroups holds the groups, childWeightKg the approved weight range.

Orientation

orientation says in which direction of travel the seat can be installed. Seats that can be installed both ways give their limits per direction in orientationRanges.

Installation and vehicle fit

installation lists the ways the seat can be fixed – with ISOFIX, with the vehicle belt, or either. A seat that can only be installed on a separate base says so in baseRequired; the bases themselves are listed in the compatibility block, as are strollers the seat can be mounted on. restraint says how the child is held in the seat. For seats with an approval for specific vehicles, the record MUST link to the manufacturer’s vehicle list in vehicleListUrl.

Profile: car seats: fields 27 fields, generated from profiles/car-seat.schema.json · in a record under profiles.carSeat
Field Type Level Description Example
approvalRegulation Link to field approvalRegulation string MUST

Regulation the seat is approved under, as shown on the approval label.

Values:
  • UN R129
  • UN R44
UN R129
approvalNumber Link to field approvalNumber string MUST

Approval number as shown on the approval label of the seat.

E4 129R-03/0000
iSize Link to field iSize boolean MUST if

Required if: approvalRegulation is UN R129.

Whether the seat is approved in an i-Size category of UN R129.

true
childHeightCm Link to field childHeightCm object MUST if

Required if: approvalRegulation is UN R129.

Range of the child's height (stature) the seat is approved for, in cm.

childHeightCm. min Link to field childHeightCm.min number MUST

Lower limit (inclusive).

40
childHeightCm. max Link to field childHeightCm.max number MUST

Upper limit (inclusive).

87
childWeightKg Link to field childWeightKg object MUST if

Required if: approvalRegulation is UN R44, or the UN R129 approval states a weight limit.

Range of the child's weight the seat is approved for, in kg.

childWeightKg. min Link to field childWeightKg.min number SHOULD

Lower limit (inclusive).

0
childWeightKg. max Link to field childWeightKg.max number SHOULD

Upper limit (inclusive).

22
weightGroups Link to field weightGroups array of strings (min. 1) MUST if

Required if: approvalRegulation is UN R44.

Weight groups of the UN R44 approval.

orientation Link to field orientation string MUST

Direction of travel in which the seat can be installed.

Values:
  • rearward
  • forward
  • both
rearward
orientationRanges Link to field orientationRanges array of objects (min. 2) MUST if

Required if: orientation is both.

Limits per direction of travel, for seats that can be installed both ways.

orientationRanges[]. direction Link to field orientationRanges[].direction string MUST

Direction of travel.

Values:
  • rearward
  • forward
rearward
orientationRanges[]. childHeightCm Link to field orientationRanges[].childHeightCm object MUST if

Required if: approvalRegulation is UN R129.

Range of the child's height in this direction, in cm.

orientationRanges[].childHeightCm. min Link to field orientationRanges[].childHeightCm.min number MUST

Lower limit (inclusive).

40
orientationRanges[].childHeightCm. max Link to field orientationRanges[].childHeightCm.max number MUST

Upper limit (inclusive).

87
orientationRanges[]. childWeightKg Link to field orientationRanges[].childWeightKg object MUST if

Required if: approvalRegulation is UN R44, or the approval states a weight limit for this direction.

Range of the child's weight in this direction, in kg.

orientationRanges[].childWeightKg. min Link to field orientationRanges[].childWeightKg.min number SHOULD

Lower limit (inclusive).

0
orientationRanges[].childWeightKg. max Link to field orientationRanges[].childWeightKg.max number SHOULD

Upper limit (inclusive).

22
installation Link to field installation array of strings (min. 1) MUST

Ways the seat can be fixed in the vehicle: isofix (ISOFIX anchorages) or vehicle-belt (the vehicle's adult belt). Several values mean that each of them is possible.

baseRequired Link to field baseRequired boolean SHOULD

Whether the seat can only be installed on a separate base. Compatible bases are listed in the compatibility block.

false
restraint Link to field restraint string SHOULD

How the child is held in the seat: integral-harness (the seat's own harness) · impact-shield · vehicle-belt (the vehicle's adult belt, for example in booster seats).

Values:
  • integral-harness
  • impact-shield
  • vehicle-belt
integral-harness
supportLeg Link to field supportLeg boolean SHOULD

Whether the seat or its base has a support leg.

true
topTether Link to field topTether boolean SHOULD

Whether the seat uses a top tether strap.

false
rotation Link to field rotation boolean MAY

Whether the seat shell rotates for getting the child in and out.

false
vehicleTypeApproval Link to field vehicleTypeApproval string SHOULD

universal: fits vehicles with the corresponding seating positions · specific-vehicle: approved for the vehicles in a vehicle list.

Values:
  • universal
  • specific-vehicle
universal
vehicleListUrl Link to field vehicleListUrl string (URL) MUST if

Required if: vehicleTypeApproval is specific-vehicle.

Link to the manufacturer's vehicle list.

https://example.com